歡迎光臨
聯系我們:0577-85822921 | 加入收藏
  • 當前位置:浙江米勒潔凈設備科技有限公司 > 產品中心 > 不銹鋼卡箍 管夾系列 > 加長接頭,不銹鋼加長接頭,不銹鋼加長卡箍接頭廠家

    加長接頭,不銹鋼加長接頭,不銹鋼加長卡箍接頭廠家

    產品型號: 齊全-加長快裝接頭
    品  牌: 伊米勒卡箍加長接頭
    • ≧1 只
      ¥4.50
    所 在 地: 浙江溫州
    更新日期: 2022-03-02
    詳細信息
    加長接頭,不銹鋼加長接頭,快裝加長接頭,翻邊加長接頭,不銹鋼加長卡箍接頭廠家加長接頭,不銹鋼加長接頭,不銹鋼加長卡箍接頭廠家



          加長接頭,不銹鋼加長接頭,不銹鋼加長卡箍接頭廠家加長接頭,不銹鋼加長接頭,不銹鋼加長卡箍接頭廠家



          加長接頭,不銹鋼加長接頭,不銹鋼加長卡箍接頭廠家



    產品名稱:加長接頭,不銹鋼加長接頭,快裝加長接頭,翻邊加長接頭

    產品材質:不銹鋼SUS304加長接頭,不銹鋼SUS316加長接頭;


    規         格:ф19*1.5;ф25*1.5;ф32*1.5;ф45*1.5;ф51*1.5;ф57*2;ф63*2;ф76*2;ф89*2;ф102*2;ф108*2;

    所屬系列:快裝接頭系列

    公稱通徑:DN15-DN150mm

    公稱壓力:16-64KG

    適用溫度:-20~150℃

    連接方式:快裝螺紋,焊接,法蘭,快接,扳把式等。

    適用范圍:石油天然氣、車船機械制造、航空航天、冶金化工、交通、電力、集中供熱、真空、制冷工業,化工,液化石油氣,車船制造設備等。

    構造:一個硅晴墊圈,兩個接頭,一個管卡
    加長接頭,不銹鋼加長接頭,不銹鋼加長卡箍接頭廠家卡箍接頭的優點:
     1.快速,不需焊接和再鍍鋅,安裝速度比法蘭連接的管件快3倍以上。
    2.簡易 它比法蘭輕、鎖緊機械設計巧妙,螺栓數量少,無需對孔對鎖。
    3.可靠  ①該卡箍、墊圈與管端溝槽系全圓周壓緊,其管端拉力強度大,試驗壓力達4.2MPa,溫度-30℃~100℃,真空度可達0.08MPa;
    ②墊圈設計為C型,能形成三重防漏,管內壓力越大,密封越好;
    ③墊圈可因流體介質、管材、溫度來進行合適的選擇密封圈材質。
    4.隔振吸震 ①因管末端有間隙可有效地隔斷噪音及振動的傳播,熱脹冷縮時管路 亦不受影響;加長接頭,不銹鋼加長接頭,快裝加長接頭,翻邊加長接頭,不銹鋼加長卡箍接頭廠家

    ②密封墊圈也可吸收噪音及振動。
    5.經濟安全便于工程預算,較法蘭式連接節約總工程費用的20%,施工無需電源、氧氣、明火。加長接頭,不銹鋼加長接頭,不銹鋼加長卡箍接頭廠家
    6.零污染 因原件安裝不存在焊渣和破壞鍍鋅層與涂塑層的問題,故可確保管道暢通。連接后的管路尤其消防噴淋系德康統不會因其他方式的連接而產生銹蝕堵塞管路中的設備、噴淋頭等。加長接頭,不銹鋼加長接頭,快裝加長接頭,翻邊加長接頭,不銹鋼加長卡箍接頭廠家

     7.占據空間少 ①法蘭安裝空間較卡箍接頭為3:2。
    ②卡箍接頭及配件可先進行安裝,并可調整任意方向、角度,配管隨意。
     8.維護方便 拆洗與更換只需拆下兩個卡箍,4個螺栓即可,便于管路延伸、更換、轉動方向。均勻磨損。加長接頭,不銹鋼加長接頭,快裝加長接頭,翻邊加長接頭,不銹鋼加長卡箍接頭廠家
    .
    9.配管齊全我廠卡箍配件規格DN25~600,特殊規格可定制
    卡箍結構:兩個接頭把墊圈夾在中間,然后用管卡把兩個接頭連接起來.這樣即密封性好,組裝 拆卸也方便加長接頭,不銹鋼加長接頭,不銹鋼加長卡箍接頭廠家
    具體的一些尺寸請與我們電話聯系
    溫州德康*加工非標管件、加長接頭、閥門。承接各種圖紙加工非標機械零件加工,非標機械設備加工,產品包括:非標管支架,非標三通,非標彎頭,非標大小頭,非標翻邊,非標接頭,非標卡套接頭,非標管接頭,非標球閥,非標三通球閥,非標卡壓接頭,非標內外絲彎頭,非標直角彎頭等各種非標接頭和非標閥門,*加工非標的產品其質量有保障,加長接頭,不銹鋼加長接頭,不銹鋼加長卡箍接頭廠家,看起來精美細致加長接頭,不銹鋼加長接頭,快裝加長接頭,翻邊加長接頭,不銹鋼加長卡箍接頭廠家,*生產加長接頭,不銹鋼加長接頭,快裝加長接頭,翻邊加長接頭,不銹鋼加長卡箍接頭廠家
    加長接頭,不銹鋼加長接頭,快裝加長接頭,翻邊加長接頭,不銹鋼加長卡箍接頭廠家





    - - - - - --  - - - - - - --  -- - - --- ----    - - -- - -  - - - - - - - - - - - - -- - - - - - - - -  - - - - - -  - - - -- -


    加長接頭,不銹鋼加長接頭,不銹鋼加長卡箍接頭廠家
    Product Name: Extension connector, stainless steel extension connector, quick extended joints, flange extended joint


    Material: stainless steel SUS 304, SUS 316 stainless steel;

    Specification: ф19 * 1.5; ф25 * 1.5; ф32 * 1.5; ф45 * 1.5; ф51 * 1.5; ф57 * 2; ф63 * 2; ф76 * 2; ф89 * 2; ф102 * 2; ф108 * 2;

    Belongs to the series: quick connector series

    Nominal diameter: DN15-DN150mm

    Nominal pressure :16-64KG

    Suitable temperature: -20 ~ 150 ° C

    Connection: threaded quick, welding, flange, quick connect, pull handle and a spout.

    Scope of application: oil and gas, travel, machinery manufacturing, aerospace, metallurgy, transportation, electricity, centralized heating, vacuum, refrigeration industry, chemicals, liquefied petroleum gas, travel manufacturing equipment and so on.

    Construction: a clear silicon washer, two connectors, a tube card
    The advantages of the clamp connector:
    Fast, without welding and re-galvanized, install faster than the flange connection pipe more than three times faster.
    Easy it is lighter than the flange, locking the ingenious mechanical design, a small number of bolts, no holes on the lock.
    3 reliable ① The clamp, washer and the end of a pipe trench the whole circumference of the Department of compression, tension strength of the pipe end, the test pressure of 4.2MPa, temperature -30 ℃ ~ 100 ℃, vacuum up to 0.08MPa;
    The ② washer designed for the type C, can form a triple leak-proof, the greater the pressure tube, sealed the better;
    The ③ washer fluid medium, pipe, temperature suitable choice of seal materials.
    Isolation shock-absorbing 1 for possession of the end of the gap can be effectively cut off the spread of noise and vibration, thermal expansion and contraction when the pipeline is not affected;
    ② gasket can also absorb noise and vibration.
    Economic security to facilitate the project budget, a savings of 20% of the total project cost over the flange connection, construction without power, oxygen, and open flame.
    Welding slag and destruction of the zinc coating and the coated layer. Zero pollution due to the original installation does not exist, it can ensure pipeline flow. Connected after the pipeline, in particular the fire sprinkler systems and Dekang system not the other way to connect and produce rust clogging the pipeline equipment, spray first class.
    Occupy space less ① flange mounting space than the clamp connector is 3:2.
    The ② clamp connectors and accessories can be installed and can be adjusted in any direction, angle, piping casual.

    Wenzhou Dekang specializes in processing non-standard fittings, extended fittings, valves. Undertake a variety of drawing and processing of non-standard mechanical parts processing, processing of non-standard equipment, products include: non-standard pipe brackets, non-standard three links, non-standard elbow, non-standard size of the first flange of the non-standard, non-standard connector, non- standard card connectors, non-standard fittings, non-standard ball valves, non-standard ball valve, non-standard compression joints, elbows of non-standard, non-standard right angle bend, and other kinds of non-standard connector, and non-standard valves , specializes in processing non-standard products quality is guaranteed, it looks fine and detailed.



    歡迎來電咨詢加長接頭,不銹鋼加長接頭,不銹鋼加長卡箍接頭廠家;加長接頭,不銹鋼加長接頭,不銹鋼加長卡箍接頭廠家; 
     
  • 留言
    標  題: *(必填)
    內  容: *(必填)
    聯系人:
    郵  箱:
    手  機:
    固  話:
    *(必填)
    公  司: *(必填)
    地  址: *(必填)
新萄京购彩-平台